Access The Factorytalk ME Configuration Menu

If a project is already loaded on the HMI, the project must have a button to go to the HMI configuration. If there is no project, the configuration menu should load automatically.

Setup IP Address

  1. Tap Terminal Settings and select Network and Communications and tap Enter
  2. Select Network Connections and tap Enter
  3. Select Network Adaptors and tap Enter
  4. Tap IP Address
  5. Enter IP Address, Subnet, and Gateway
  6. Tap OK (F7) at the bottom of the window. I dialog will appear letting you know the device needs reset to take effect. Press Ok.
  7. Back out of the menus until you are at the main menu.
  8. Reset the device by pressing the Reset button. The device will restart.